Environmental exposure effects on composite materials for commercial aircraft

The effects of environmental exposure on composite materials are studied. The environments considered are representative of those experienced by commercial jet aircraft. Initial results have been compiled for the following material systems: T300/5208, T300/5209 and T300/934. Specimens were exposed on the exterior and interior of Boeing 737 airplanes of three airlines, and to continuous ground level exposure at four locations. In addition specimens were exposed in the laboratory to conditions such as: simulated ground-air-ground, weatherometer, and moisture. Residual strength results are presented for specimens exposed for up to two years at three ground level exposure locations and on airplanes from two airlines. Test results are also given for specimens exposed to the laboratory simulated environments. Test results indicate that short beam shear strength is sensitive to environmental exposure and dependent on the level of absorbed moisture

Damage tolerant composite wing panels for transport aircraft

Commercial aircraft advanced composite wing surface panels were tested for durability and damage tolerance. The wing of a fuel-efficient, 200-passenger airplane for 1990 delivery was sized using grahite-epoxy materials. The damage tolerance program was structured to allow a systematic progression from material evaluations to the optimized large panel verification tests. The program included coupon testing to evaluate toughened material systems, static and fatigue tests of compression coupons with varying amounts of impact damage, element tests of three-stiffener panels to evaluate upper wing panel design concepts, and the wing structure damage environment was studied. A series of technology demonstration tests of large compression panels is performed. A repair investigation is included in the final large panel test

Microwave Radar-Based Breast Cancer Detection:Imaging in Inhomogeneous Breast Phantoms

This document is made available in accordance with publisher policies. Please cite only the published version using the reference above. Full terms of use are available

Space station integrated wall design and penetration damage control

The analysis code BUMPER executes a numerical solution to the problem of calculating the probability of no penetration (PNP) of a spacecraft subject to man-made orbital debris or meteoroid impact. The codes were developed on a DEC VAX 11/780 computer that uses the Virtual Memory System (VMS) operating system, which is written in FORTRAN 77 with no VAX extensions. To help illustrate the steps involved, a single sample analysis is performed. The example used is the space station reference configuration. The finite element model (FEM) of this configuration is relatively complex but demonstrates many BUMPER features. The computer tools and guidelines are described for constructing a FEM for the space station under consideration. The methods used to analyze the sensitivity of PNP to variations in design, are described. Ways are suggested for developing contour plots of the sensitivity study data. Additional BUMPER analysis examples are provided, including FEMs, command inputs, and data outputs. The mathematical theory used as the basis for the code is described, and illustrates the data flow within the analysis

Space station integrated wall design and penetration damage control

A methodology was developed to allow a designer to optimize the pressure wall, insulation, and meteoroid/debris shield system of a manned spacecraft for a given spacecraft configuration and threat environment. The threat environment consists of meteoroids and orbital debris, as specified for an arbitrary orbit and expected lifetime. An overall probability of no penetration is calculated, as well as contours of equal threat that take into account spacecraft geometry and orientation. Techniques, tools, and procedures for repairing an impacted and penetrated pressure wall were developed and tested. These techniques are applied from the spacecraft interior and account for the possibility of performing the repair in a vacuum. Hypervelocity impact testing was conducted to: (1) develop and refine appropriate penetration functions, and (2) determine the internal effects of a penetration on personnel and equipment

Investigation and characterization of constraint effects on flaw growth during fatigue loading of composite materials

An investigative program is presented in an attempt to add to the current understanding of constraint effects on the response of composite materials under cyclic loading. The objectives were: (1) to use existing data and to develop additional data in order to establish an understanding and quantitative description of flaw growth in unidirectional lamina under cyclic loading at different load direction to fiber direction angles; (2) to establish a similar understanding and description of flaw growth in lamina which are embedded in laminates between other unflawed lamina; (3) to determine the nature of the influence of constraint on flaw growth by quantitatively comparing the results of the tests; and (4) to develop a model and philosophy of constraints effects based on our investigative results

Content-aware power saving multimedia adaptation for mobile learning

Due to the tremendous enhancements in the capabilities of mobile devices in recent years and accessibility to higher bandwidth mobile internet, the use of online multimedia learning resources on mobile devices is increasingly becoming popular. Improvements in battery capacity have not matched the same advancements compared to other features of mobile devices. Limited Battery power is introducing a significant challenge in making better use of online educational multimedia resources. Online Multimedia Resources drains more battery power as a result of higher amount of wireless data transfer and therefore limiting learning opportunities on the move. Many power saving multimedia adaptation techniques have been suggested. Majority of these techniques achieve battery efficiency while reducing multimedia quality. So far, however, to the best of our knowledge no previous effort has considered the factor of learning efficacy in multimedia adaptation process. Existing adaptation techniques are susceptible to information loss as a result of quality of reduction. Such loss affects the learning content efficacy and jeopardizes the learning process. In this paper, we recommend a novel power save educational multimedia adaptation approach that considers the learning aspect of multimedia in the adaptation process. Our technique enables learning for extended duration by battery power saving without putting the learning process at risk. Efficacy of entire learning resources is managed by not allowing any part of the learning multimedia to be delivered in a quality that will negatively affect the learning outcome. We also present a framework that guides the implementation of our approach followed by description of our prototype application that uses educational multimedia metadata implemented in semantic web technologies

Platelet-mediated metabolism of the common dietary flavonoid, quercetin.

BACKGROUND: Flavonoid metabolites remain in blood for periods of time potentially long enough to allow interactions with cellular components of this tissue. It is well-established that flavonoids are metabolised within the intestine and liver into methylated, sulphated and glucuronidated counterparts, which inhibit platelet function. METHODOLOGY/PRINCIPAL FINDINGS: We demonstrate evidence suggesting platelets which contain metabolic enzymes, as an alternative location for flavonoid metabolism. Quercetin and a plasma metabolite of this compound, 4'-O-methyl quercetin (tamarixetin) were shown to gain access to the cytosolic compartment of platelets, using confocal microscopy. High performance liquid chromatography (HPLC) and mass spectrometry (MS) showed that quercetin was transformed into a compound with a mass identical to tamarixetin, suggesting that the flavonoid was methylated by catechol-O-methyl transferase (COMT) within platelets. CONCLUSIONS/SIGNIFICANCE: Platelets potentially mediate a third phase of flavonoid metabolism, which may impact on the regulation of the function of these cells by metabolites of these dietary compounds

ELBOW FLEXOR MUSCLE FUNCTION AND UPPER ARM GIRTH FOLLOWING CONCURRENT STRENGTH AND ENDURANCE TRAINING IN NON RESISTANCETRAINED FEMALES

The study investigated the effects of eight weeks of concurrent muscular strength and endurance resistance training of the non-dominant elbow flexors on muscular strength, endurance, and upper arm girths of previously non resistance-trained females. Subjects (n=12) were assigned to one of 3 training groups. These groups were Strength (S), Endurance (E), or Combined (C) with pre and post-training tests for arm girths, 1 RM preacher curl, maximal isometric torque, peak isokinetic torque at velocities of 30 and 90" s-', and total work during 25 continuous repetitions at 90"s.'. Significant increases in prepost strength and endurance occurred in both C and S groups, but not E, in the absence of any change in arm girth. Furthermore, C training produced equivalent gains in strength and endurance to the S and E groups, respectively

Gap junctions and connexin hemichannels in the regulation of haemostasis and thrombosis

Platelets are involved in the maintenance of haemostasis but their inappropriate activation leads to thrombosis, a principal trigger for heart attack and ischemic stroke. Although platelets circulate in isolation, upon activation they accumulate or aggregate together to form a thrombus, where they function in a coordinated manner to prevent loss of blood and control wound repair. Recent reports indicate that the stability and functions of a thrombus are maintained through sustained, contact dependent signalling between platelets. Given the role of gap junctions in the coordination of tissue responses, it was hypothesized that gap junctions may be present within a thrombus and mediate intercellular communication between platelets. Therefore studies were performed to explore the presence and functions of connexins in platelets. In this brief review, the roles of hemichannels and gap junctions in the control of thrombosis and haemostasis and the future directions for this research will be discussed